Index of /cams

[ICO]NameLast modifiedSizeDescription

[PARENTDIR]Parent Directory  -  
[DIR]biss/2010-05-20 13:56 -  
[DIR]camd3/2010-05-20 13:56 -  
[DIR]camx/2010-05-20 13:56 -  
[DIR]cccam/2011-12-17 11:18 -  
[DIR]editor/2010-05-20 13:56 -  
[DIR]evocamd/2010-05-20 13:56 -  
[DIR]faq/2010-05-20 13:56 -  
[DIR]hadu/2010-11-17 00:42 -  
[DIR]mbox/2010-05-20 13:56 -  
[DIR]mgcamd/2010-05-20 13:56 -  
[DIR]newcamd/2010-05-20 13:56 -  
[DIR]newcs/2010-05-20 13:56 -  
[DIR]oscam/2012-05-23 02:26 -  
[DIR]other/2010-05-20 13:56 -  
[DIR]radegast/2010-05-20 13:56 -  
[DIR]s2emu/2010-05-20 13:56 -  
[DIR]sbcl/2010-05-20 13:56 -  
[DIR]scam/2010-05-20 13:56 -  
[DIR]vdr/2010-05-20 13:56 -  
[DIR]vplug/2010-05-20 13:56 -  
[TXT]README.html2011-08-10 20:20 5.5K 
[   ]Cardsharing und andere Weisheiten.pdf2010-02-11 12:30 71K 

OPP-DVB.ath.cx - Camds

Camds

Dateien

In den verschiedenen Camd Packs befinden sich evtl. ausfuehrbare Dateien, wie z.B. CCcam.mipsel, CCcam.ppc oder auch CCcam.x86. Diese sind fuer die verschiedenen Sat Boxen und somit auf fuer die verschiedenen Betriebssysteme. Hier mal ein paar Beispiele:

.ppc und .ppc_old

Diese Dateien, z.B. CCcam.ppc wird in cccam umbenannt oder mgcamd.ppc(DREAMBOX), mgcamd.ppc_old(DBox2) wird in mgcamd umbenannt und kann dann in der D-Box2 verwendet werden. Andere emus funktionieren im gleichen Prinzip.

.mipsel/.mips

Diese Dateien, z.B. CCcam.mipsel wird in cccam umbenannt oder mgcamd.mips wird in mgcamd umbenannt und kann dann in der Dreambox verwendet werden. Andere emus funktionieren im gleichen Prinzip.

.x86 und .x86_64

Diese Dateien, z.B. CCcam.x86/CCcam.x86_64 wird in cccam umbenannt oder mgcamd.x86/mgcamd.x86_64 wird in mgcamd umbenannt und kann dann auf einem PC verwendet werden. Andere emus funktionieren im gleichen Prinzip.

Fuer weitere Infos siehe auch hier: http://www.dreamboxworld.com/dbw/emu_dream.htm


Attribute

Wichtig:

Dateiattribute (rechte oder chmod) muessen auch gesetzt werden sonst funktioniert es auch nicht.

Nachdem installieren der verschiedenen Emus muss die Box evtl. neu gestartet werden!!!


CCcam

Keys Ordner: /var/keys - SoftCam.Key (chmod 644) , AutoRoll.Key (chmod 644) , constant.cw (chmod 644)

Emu files: /var/bin - cccam (chmod 777)

Config files: /var/keys - CCcam.cfg (chmod 777) , evtl. noch CCcam.channelinfo, CCcam.prio und CCcam.providers alle (chmod 644)


MGcamd

Keys Ordner: /var/keys - SoftCam.Key (chmod 644) , AutoRoll.Key (chmod 644)

Emu files: /var/bin - mgcamd (chmod 777)

Config files: /var/keys - mg_cfg (chmod 777)


Camd3

Keys Ordner: /var/keys - camd3.keys (chmod 644)

Emu files: /var/bin - camd3 (chmod 755) /var/etc - camd3 (chmod 755), .servers camd3.users (chmod 755)

Config files: /var/keys - camd3.config (chmod 755)

AU files: /var/keys/ - seca_hash.bin (chmod 744) , seca2_hash_0070.bin, seca2_mask_0070.bin, camd3.keys (chmod 644)


Radegast

Keys Ordner: /var/keys - SoftCam.Key (chmod 644) , AutoRoll.Key (chmod 644)

Emu files: /var/bin - rdgd (chmod 755) , camd.rdgd (chmod 755) , netpilot (chmod 777)

Config files: /var/etc - radegast.cfg (chmod 755)


Newcamd

Keys Ordner: /var/scce - keylist (chmod 744) , rsakeylist (chmod 744) , ppua (chmod 744) , tpscrypt (chmod 744) , mappings (chmod 644) , priority (chmod 644)

Emu files: /var/bin - newcamd.ppc (chmod 755) , cardserv (chmod 755) , cardspider (chmod 755) , betad (chmod 755)

Config files: /var/tuxbox/ config - newcamd.conf, cardserv.cfg, cardspider.cfg, betad.cfg (chmod 755), die anderen (chmod 644)

Lib files: /var/lib - libcrypto.so.0.9.7 (chmod 755)

AU files: /var/scce/ - nagraram3.bin, nagraepr3.bin, nagraram7.bin, nagraepr7.bin, nagraram10.bin, nagraepr10.bin, nagraram11.bin, nagraepr11.bin, strom3.bin alle (chmod 644)


UCAS/SCAM

Keys Ordner: /var/keys - SoftCam.Key, seca2, nagra, via, irdeto, seca, conax alle (chmod 644)

Emu files: /var/bin - scam (chmod 755)

Config files: /var/keys - softcam.cfg

AU files: /var/keys/ - seca2 (chmod 644) , seca (chmod 644) , /nagra_rom (chmod 755) die Dateien im Ordner selbst haben (chmod 644)


Evocamd

Keys Ordner: /var/keys - Autoupdate.Key (chmod 644) , Keylist.txt (chmod 644)

Emu files: /var/bin - evocamd (chmod 755)

Config files: /var/keys - camd_cfg (chmod 777)

AU files: /var/keys - Autoupdate.Key (chmod 644) /var/scce/ - nagraepr3.bin, nagraepr7.bin, nagraepr10.bin, nagraepr11.bin, nagraram3.bin, nagraram7.bin, nagraram10.bin, nagraram11.bin, nagrarom3ext.bin (chmod 777), die anderen (chmod 644)


g**x

Keys Ordner: /var/keys - seca, nagra, via, irdeto, conax alle (chmod 644)

Emu files: /var/bin - g**x (chmod 777)

Config files: /var/keys - gbox_cfg (chmod 777)

AU files: /var/keys/nagra_roms/ - eeprom10.bin, eeprom11.bin, eeprom3.bin, eeprom7.bin, ram_10.bin, ram_11.bin, ram_3.bin, ram_7.bin, rom10.rom, rom11.rom, rom3.rom, rom7.rom alle (chmod 644)


CamX

Keys Ordner: /var/keys - SoftCam.Key (chmod 644)

Emu files: /var/bin - camx server (chmod 777)

Config files: /var/bin - config serverconfig (chmod 777)

AU files: /var/keys/ - AutoRoll.key (chmod 644)


Xcamd

Keys Ordner: /var/keys - Keys.txt (chmod 644) , AutoRoll.key (chmod 644)

Emu files: /var/bin - xcamd (chmod 777)

Config files: /var/etc - xcamd.conf (chmod 777)

AU files: /var/nagra_roms/ - eeprom10.bin, eeprom11.bin, eeprom3.bin, eeprom7.bin, ram_10.bin, ram_11.bin, ram_3.bin, ram_7.bin, rom10.rom, rom11.rom, rom3.rom, rom7.rom alle (chmod 644)


FTP Anleitung

http://downloads.oppserver.net/faq/win/filezillafaq/